- About
-
Products
HawkCompact, high-fidelity systems for near-field hospitality and portable applications
HarrierHigh resolution systems for near-mid field hospitality and portable applications
OspreyScalable high resolution systems for mid-throw venue and outdoor applications
Heavy DutyHigh efficiency and high output speakers for challenging environments.
- Contact
- Resources
Traction Engine
HAWK SOLO 12
Passive Reflex Subwoofer | Single 12″
The Hawk Solo 12 is a low frequency loudspeaker featuring a 12” (320mm) transducer with a 3” (76mm) voice coil. It has a flared port to assist laminar air flow and maximize acoustic output. Two Neutrik® NL4 SpeakON™ sockets are fitted to a recessed connector dish, allowing the Solo 12 to be placed flush against a wall. The connectors are wired in parallel, which enables up to four speakers to be connected to a single amplifier channel, reducing install cost and complexity.
Construction is from 18mm Birch plywood that is sourced from sustainable and managed woodland. The cabinet is finished in black textured polyurea, and the driver is protected by a heavy duty 2mm thick steel grill. For secure stacking, rubber feet are fitted on the bottom of the cabinet with corresponding recesses on the top of the cabinet. The rubber feet can be moved to the side allowing the cabinet to be orientated in a landscape or portrait configuration. In landscape orientation there is a M20 speaker pole mount on the top of the cabinet. On the rear of the cabinet is a recessed handle which combined with the front lip allow for easy handling. The damping material used in the cabinet is made from recycled single use plastics. M10 mounting points are provided on the top of the cabinet so that eyebolts can be fitted for aerial suspension.
The Hawk Solo 12 has been designed to use Traction Engine amplifiers and Traction Control DSP.
SPECIFICATIONS
| Type | Single 12” Reflex Sub | Frequency Response (1) | 41Hz - 150Hz +/-3dB | HF Driver | N/A | LF Driver | 12” (320mm) / 3” (76mm) voice coil, ferrite magnet | Power Handling HF (2) | N/A | Power Handling LF (2) | 1000W Program | Recommended Amplifier | Traction Engine 4|1000-DSP | Sensitivity (3) | 97dB | MaximumSPL (4) | 130dB | Nominal Impedance | 8 Ohms | Crossover | Manufacturer supplied DSP preset only | Connectors | 2x Neutrik® NL4 SpeakON™ | Nominal Dispersion (-6dB) | Omni | Primary Construction Material | 18mm Birch Plywood | Available Finish | Black PU coating | Dimensions | 621mmx 370mmx 495mm | Fittings | 4x M10 Flying Points, M20 Pole Mount, 4x Rubber Feet | Dimensions (WxHxD) | 621mmx 370mmx 495mm, 24.4” x 14.6” x 19.5” | Weight | 23.5kg, 51.8 lbs | Available Accessories | N/A |
|---|---|---|
- Measured on axis in half (2pi) space at two meters and referred to 1 meter.
- Tested to AES 2-1984 Rev. 2003.
- Measured in half (2pi) space at 2 meters with 2.83V input, using band limited pink noise, then referred to 1 meter.
- Calculated at 1 meter.
