- About
-
Products
HawkCompact, high-fidelity systems for near-field hospitality and portable applications
HarrierHigh resolution systems for near-mid field hospitality and portable applications
OspreyScalable high resolution systems for mid-throw venue and outdoor applications
Heavy DutyHigh efficiency and high output speakers for challenging environments.
- Contact
- Resources
Traction Engine
HARRIER SW15
Passive Reflex Subwoofer | 1 x 15″
The SW15 is a passive reflex subwoofer featuring a 15” driver with high power handling, high linear excursion and superior heat dissipation for stability and fidelity at full output.
The SW15 occupies a small footprint whilst providing a stable foundation for pole mounted systems, and the use of 15mm birch plywood throughout keeps the total weight low. FEA optimised bracing alongside careful acoustic design prevents the cabinet from resonating excessively and distorting the output, which leads to full and impactful bass at all listening volumes.
This sub has been designed specifically to fit into our Harrier 2.1 system, used as a slave sub for the active Harrier SW15-2.1. The four rubber feet fitted to the underside align with the active version, adding a variety of options for stacking and arranging Harrier systems.
M10 threads places around the top of the cabinet are provided for suspending or securing the SW15 in install situations, and an M20 threaded pole mount is fitted to the top. Two Neutrik NL4 connectors wired in parallel are provided on a recessed connector dish, with the driver input taken from pins 2+ and 2-, which minimises cabling and makes for an easier setup.
The cabinet is finished in textured polyurea, and the interior lined with damping material made from recycled plastics. All external fixings are stainless steel with an anodised black finish. The drivers are protected by a heavy duty 14 Gauge (2mm) steel grill with a black powder coated finish.
Specifications
| Type | Single 15” bass reflex subwoofer | Frequency Response | 35Hz-200Hz (-3dB) | HF Driver | N/A | LF Driver | 15” transducer with high power handling and low power compression | Power Handling HF (2) | N/A | Power Handling LF (2) | 2000W Program | Recommended Amplifier | Traction Engine 4|2700-DSP | Sensitivity (2) | 97dB | Maximum SPL (4) | 133dB | Nominal Impedance | 8 Ohm | Crossover | Manufacturer supplied DSP preset only | Connectors | 2x Neutrik® NL4 SpeakOn™ with pins linked | Input Connections | Pins 2 +/- | Nominal Dispersion (-6dB) | Omni | Primary Construction Material | 15mm Birch plywood | Available Finish | Black PU Coating | Dimensions | 612mm x 456mm x 515mm | Fittings | 8x M10 threaded rigging points | Weight | 40kg |
|---|---|---|
- Measured on axis in half (2pi) space at two meters and referred to 1 meter.
- Tested to AES 2-1984 Rev. 2003.
- Measured in half (2pi) space at 2 meters with 2.83V input, using band limited pink noise, then referred to 1 meter.
- Calculated at 1 meter.
