Traction Engine 4|1000-DSP
DSP Power Amplifier
Combining new technology power amplification with the highest definition DSP, this amplifier offers performance and convenience at a whole new level

SPECIFICATIONS
Output Power (per channel)* | 8 ohms: 500W, 4 ohms: 1000W, 2.7 ohms: 1400W, 2 ohms: 1200W | Output Power (bridged)* | 8 ohms: 2000W, 4 ohms: 2400W | THD | (@1dB below maximum output power) @ 1kHz<0.18% | 20Hz to 20kHz<0.2% | Gain | 32dB | Sensitivity | (for maximum power)6.2dBu (1.6V) | Frequency Response | 20Hz to 20kHz (+0.5dB) | Power Consumption | Nominal @ 240V into 4 ohms: 2.9A | Nominal @120V into 4 ohms: 6.0A | Dimensions | Amplifier (2U) (mm): 88(h) x 482(w) x 428(d) | Boxed (shipping size – UK): 230 x 580 x 560 (Single boxed) | Boxed (shipping size - all except UK): 250 x 610 x 600 (Double boxed) | Weight | Amplifier: 10.0kg (24.0lbs) | Boxed (shipping weight): 12.0kg (27.3lbs) | Input Impedance | 20k ohms (Active balanced) | Input CMRR | > 60dB Damping Factor: >500 (8 ohms / 1kHz) | GPIO | Isolated inputs (x 2) and outputs (x 2) for VCA/standby control/memory recall and fault reporting | Signal Limiters | Operate at maximum power to prevent excessive clipping | Protection | Output short circuit, DC; Over-temperature; Mains in-rush control, over voltage, over current | Output Power Additional Specifications | See Traction Engine 4|1000-N (Non-DSP Version) Datasheet | DatasheetPower Consumption and Thermal Emissions | Continuous music (with Crest Factor of 4.8 (14dB)) | See Traction Engine 4|1000-N (Non-DSP Version) Datasheet |
---|
*2.7 ohm power quoted for highest single ended output and greatest efficiency (3 x 8 ohm parallel drivers). Amplifier is stable with 2 ohm loads but output will be reduced.