15-HD

Passive 2-way | 15″ + 2.5″ CD

The 15HD is a passive two-way loudspeaker featuring a 15” low frequency transducer with weatherproofing on both sides of the cone, and a 1.4” exit compression driver with a polyester diaphragm fitted to a rotatable 80Hx50V horn. This polyester diaphragm helps the 15HD maintain a smooth and unfatiguing output even at high SPL thanks to its high frequency extension and excellent resonance damping properties. The 15HD uses a passive crossover network to allow it to work in single channel operation from 55Hz to 20kHz.

The 15HD focusses on delivering excellent performance from a lightweight enclosure whilst retaining a sleek install friendly look. M10 fixing points on each side, top and bottom, allow for a variety of mounting options and the rotatable horn lets the user operate the 15HD in landscape or portrait orientations. Furthermore, the cabinet has 45-degree angles towards the rear of the cabinet allowing it to be used as a floor wedge or on top of a subwoofer as a DJ monitor.

15mm birch plywood construction contributes to a lightweight but durable cabinet, and the 2mm powder coated steel grille protects the drivers from damage. A textured PU coating adds a final layer of protection from scratching, denting and moisture for the cabinet

DOWNLOAD SPEC SHEET

DOWNLOAD USER MANUAL

SPECIFICATIONS

Type 15” 2-way with 1.4” exit CD
Frequency Response (1) 55Hz – 20kHz
HF Driver 1.4” exit CD with Polyester dome diaphragm
LF Driver Weatherproofed 15” transducer with 3” voice coil
Power Handling HF (2) N/A
Power Handling (2) 500W AES | 1000W Program
Recommended Amplifier Traction Engine 4|1000-DSP
Sensitivity (2) 99dB
Maximum SPL (4) 132dB
Nominal Impedance 8 Ohm
Crossover Internal Passive Network
Connectors 2x Neutrik® NL4 SpeakOn™ with all pins linked
Nominal Dispersion (-6dB) 80H | 50V
Primary Construction Material 15mm Birch Plywood
Available Finish Black Textured PU
Dimensions 700m x 440mm x 415mm
Fittings 12x M10 rigging points | 35mm pole mount
Weight 33kg
Available Accessories HD15 U-Bracket
Notes
(1) Measured on axis in half (2pi) space at two meters and referred to 1 meter. With DSP preset applied.
(2) Tested to AES 2-1984 Rev. 2003.
(3) Measured in half (2pi) space at 2 meters with 2.83V input, using band limited pink noise, then referred to 1 meter.
(4) Calculated at 1 meter.

TRACTION SOUND

Take control with fully optimised sound systems